Skip to main content

Capture Action

An action that captures the view of a camera element.

Updated yesterday

Overview

A Capture action captures a photo of a camera element's view using the device's camera.

To use the device's camera without a camera element or to open the camera above the prototype's UI, use an Open Camera action.


Action Properties

Mode

Set the mode to photo or video.

Target

Select the camera element that previews the image this action will capture.

Output

Select the image element for the captured photo to fill. (for photo mode only)

Save to Library

Choose if the captured image will be saved to the device. (for photo mode only)

Capture

Choose to capture the camera view or a different object (available for photo mode if Save to Library is turned on):

  • Camera View: Only save the image captured by the camera view element.

  • Custom: Select any object (with or without the camera view included) to save to your camera roll.

Recording

Set if the action should start or stop the video recording. (for video mode only)

Recording Quality

Set the quality of the recording to 720p (low), 1080p (medium), or 4k (high). (for video mode only)

Recording FPS

Set the frames per second to 12, 24, or 30 fps. (for video mode only)

Did this answer your question?